Please confirm your age to continue. I hereby confirm that I am at least 18 years old.
The SQuape N[duro]

With the SQuape N[duro] you get a durable and resistant atomiser, which will be a reliable companion for you in all situations. The extremely simple operation, the excellent taste and proven safety of the SQuape N[duro] will convince you every day.

The SQuape N[duro] is a rebuildable tank atomiser which was developed and produced in its entirety in Switzerland. It is made by StattQualm. The N[duro] design comes in two versions: Direct to lung (DL) and Mouth to lung (MTL). The only major difference between the versions is the type of air flow (base and closing ring). DL means an open

With the SQuape N[duro] you get a durable and resistant atomiser, which will be a reliable companion for you in all situations. The extremely simple operation, the excellent taste and proven safety of the SQuape N[duro] will convince you every day.

The SQuape N[duro] is a rebuildable tank atomiser which was developed and produced in its entirety in Switzerland. It is made by StattQualm. The N[duro] design comes in two versions: Direct to lung (DL) and Mouth to lung (MTL). The only major difference between the versions is the type of air flow (base and closing ring). DL means an open

With the SQuape N[duro] you get a durable and resistant atomiser, which will be a reliable companion for you in all situations. The extremely simple operation, the excellent taste and proven safety of the SQuape N[duro] will convince you every day.

The SQuape N[duro] is a rebuildable tank atomiser which was developed and produced in its entirety in Switzerland. It is made by StattQualm. The N[duro] design comes in two versions: Direct to lung (DL) and Mouth to lung (MTL). The only major difference between the versions is the type of air flow (base and closing ring). DL means an open air draw adjustable down to a restricted air draw. MTL means a very tight air draw adjustable to a more moderate tight air draw. Both atomiser are compatible and you can switch between the two versions by exchanging the base and the closing ring.

The SQuape N[duro] combines all the advantages of its previous models: clever design of current conduction, nonconductive surface of the whole atomiser-chamber (consisting of ematalised aluminum), haptically simple closing of the tank by a quick turn and large filling holes. Due to the self-contained system, the tank can be transported separately from the base even when filled.

With the SQuape N[duro] you get a durable and resistant atomiser, which will be a reliable companion for you in all situations. The extremely simple operation, the excellent taste and proven safety of the SQuape N[duro] will convince you every day.

The SQuape N[duro] is a rebuildable tank atomiser which was developed and produced in its entirety in Switzerland. It is made by StattQualm. The N[duro] design comes in two versions: Direct to lung (DL) and Mouth to lung (MTL). The only major difference between the versions is the type of air flow (base and closing ring). DL means an open air draw adjustable down to a restricted air draw. MTL means a very tight air draw adjustable to a more moderate tight air draw. Both atomiser are compatible and you can switch between the two versions by exchanging the base and the closing ring.

The SQuape N[duro] combines all the advantages of its previous models: clever design of current conduction, nonconductive surface of the whole atomiser-chamber (consisting of ematalised aluminum), haptically simple closing of the tank by a quick turn and large filling holes. Due to the self-contained system, the tank can be transported separately from the base even when filled.

47.8 mm
Height
24 mm
Diameter
SingleCoil
Coiling
MTL or DL
Airflow
Features
  • elegant and clean design
  • easy filling by turning the top cap (TopFilling)
  • stepless air flow control by turning the tank
  • single coil operation
  • adjustable 510 connector (gold-plated)
  • deck is accessible even with full tank
  • lockable and leak-proof tank
  • non-conductive components inside to avoid short circuits
  • user-friendly handling and coiling options
  • exchangeable borosilicate glass
  • temp. control and volt/watt suitable
  • easy switching between the three positions; „remove“, „vape“ (with air flow control) and „closed“ by turning the tank.
  • 100% Made in Switzerland

Note: It is necessary to insert the enclosed Closing Ring once before use (see supplementary sheet).    

Closing Ring DL2  Closing Ring MTL final unten 
 Closing Ring SQuape N[duro] DL  Closing Ring SQuape N[duro] MTL
 Base N DL  Base N MTL
 Base SQuape N[duro] DL  Base SQuape N[duro] MTL

  • Diameter: 24 mm
  • Height (without SQuip Tip and 510 connector): 47.8mm
  • Weight: 69g
  • Connector: 510
  • Tank capacity: ~5ml / ~2ml (only TPD 2ml countries)

  • Stainless steel components: Steelnumber 1.4404 / 316L
  • Glass: Borosilicate glass
  • Deck, chimney and closing ring: Aluminium ematalised, anodised
  • Centerpin: Ecobrass gold-plated
  • Mouthpiece: POM
  • O-Rings: nbr 70 shore and 40 shore

FAQ
  • I got dry hits.
  • - Open the liquidcontrol clockwise (see manual).
    - Is there still enough liquid in the tank?
    - There is too much cotton in the tank. The pockets should only be fluffed with cotton. With the DL version, cut the cotton at the edge of the deck. If necessary eventhin out a bit. With the MTL version, cut off the cotton slightly away from the deck.
    - Do not stuff the cotton into the pockets, just lay it down.

  • I got some leakage – liquid is draining out of the afc hole.
  • - Did you assemble the closing ring?
    - Is the Top Cap Ring completely closed so that the red orings are no longer visible in the filling holes?
    - Are the small o-rings on the sides of the deck in place?
    - Is the glass defective?
    - Is the cotton fluffy in the pockets?
    - Is it time to change the coil and cotton because the cotton has become over saturated over time?
    - Have you filled the SQuape N[duro] only in the "closed" and "remove" mode?

  • I can not or only with difficulty move the tank and thus the liquid and airflow control.
  • - Remove the Closing Ring from the tank and check if a foreign object is trapped.
    - Is the Closing Ring inserted correctly?
    - Was the Closing Ring lubricated with VG or liquid before insertion?
    - Has the deck slid up? This can happen if the center pin protrudes too much from the 510 connector and the base is screwed with considerable force onto a socket or mod that does not have a spring loaded pin. If yes, please contact our support. We will explain how you can fix this. support@squape.ch

  • No contact with the mod.
  • Unscrew the centerpin a little . If this does not help, contact support@squape.ch.

  • How often do I have to clean the SQuape N[duro]?
  • From time to time it is necessary to unscrew the center pin and wipe it with a cloth. We recommend cleaning the SQuape N[duro] occasionally with running water or an ultrasonic bath. Never clean with a dishwasher.

  • My glass is shattered.
  • Glasses for the Squape N[duro] can be purchased as spare parts.

  • My Top Cap ring moves too heavy / too light
  • You can remove the ring from the chimney and replace the o-ring underneath with one from the spare set. O-rings have different tolerances and can influence the resistance of the rotation.

  • How do I get a SQuape N[duro]?
  • The shop list can be found on our partner page or directly on shop.squape.ch/en

  • Where can I get more information and tips?
  • Check our Facebook group: https://www.facebook.com/groups/squape.stattqualm.official